User manual

1
1-318
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
level 1 long distance, and long for level 2 long distance. In the
switchShow output, the format is Lx, where x is the long distance
level number, except for level 0, which is not displayed in
switchShow.
Operands This command has the following operands:
slotnumber
Specify the slot number in an ED-12000B switch. The slot
number must be followed by a slash ( / ) and the port
number.
The ED-12000B has a total of 10 slots counted from 1 to 10.
Slot number 5 and 6 are control processor cards, and slot 1
through 4 and 7 through 10 are switch cards. On each switch
card, there are 16 ports counted from the bottom 0 to 15. A
particular port must be represented by both slot number (1
through 4 or 7 through 10) and port number (0 through 15).
This operand is not required for switches that do not have
blades.
portnumber
The port number to be configured. Valid values for port
number vary depending on the switch type. This operand is
required.
distance
This operand indicates the distance to the connected port.
This operand is required. The valid values for this operand
are:
L0 = Deconfigure port to be regular switch port. This option
supports up to 10 km links for 1 G, or 5 km links for 2 G.
LE = Level E mode is for E_ports for distances beyond 5km
and up to 10km especially for 2 G link speeds. LE does not
require extended fabric license.
L1 =Level-one long distance, up to 50 km for a 1 Gb and a 2
Gb link.
L2 = Level-two long distance, up to 100 km for a 1 Gb link
and 50 km for a 2 Gb link.
vc_translation_
link_init
Specify 1 to activate long distance link initialization mode.
Specify 0 to deactivate this mode. The default value is 0
(disabled). This operation is optional.