User manual

sensorShow

1-391

Telnet Commands

Example The output of this command is different between v3.0 and v4.0.

Below is an example of the output of this command from v4.0:

switch40:admin> sensorshow

sensor 1: (Temperature) is Ok, value is 32 C

sensor 2: (Temperature) is Absent

sensor 3: (Temperature) is Ok, value is 44 C

sensor 4: (Temperature) is Absent

sensor 5: (Temperature) is Ok, value is 40 C

sensor 6: (Temperature) is Absent

sensor 7: (Fan ) is Ok, speed is 3125 RPM

sensor 8: (Fan ) is Ok, speed is 2986 RPM

sensor 9: (Fan ) is Ok, speed is 3013 RPM

sensor 10: (Power Supply ) is Ok

sensor 11: (Power Supply ) is Ok

sensor 12: (Power Supply ) is Absent

sensor 13: (Power Supply ) is Ok

switch40:admin>