System information

VNX™ System Operations102 of 114 Release 7.0
Use CLI options to perform script operations
Table 11 on page 102 lists the Automatic Collection and Transfer tool’s command
options and descriptions. You must have root or VNX administrator privileges to use
this tool. As a result, be sure to log in to the Control Station as root or nasadmin
before using this tool.
Command options
To display a list of Automatic Collection and Transfer tool command options, type:
$ /nas/tools/automaticcollection -help
Table 11 Automatic Collection and Transfer tool command options
Option Description
-help Displays the complete list of options.
-getlogs Runs the collection script which, when complete, causes the logs
to be transferred if the transfer script is enabled.
-filename <filename> Includes additional information, such as the case number, in the
filename.
-retrievedump Extracts the most recent dump and then runs the transfer script
for dumps if the transfer script is enabled.
-slot Indicates the number of the slot from which to retrieve the dump.
-local Writes the dump to a local directory.
-transferlogs Runs the transfer script for logs. The script reviews timestamps
on all collected logs in /nas/var/emcsupport and then transfers the
most recent set of logs in this partition.
-config Displays the current configuration.
-disable Turns off the transfer script.
-enable Turns on the transfer script.
-info Checks the state of the transfer script.