System information

103 of 114Release 7.0VNX™ System Operations
User examples
The following describe the functions you are most likely to perform with the
Automatic Collection and Transfer tool:
◆ To enable automatic transfer of file logs and dumps to EMC Customer Service,
at the command prompt, type:
$ /nas/tools/automaticcollection -enable
◆ To disable automatic transfer of log files and dumps if they have been
previously enabled, at the command prompt, type:
$ /nas/tools/automaticcollection -disable
◆ To completely turn off the Automatic Collection and Transfer tool, at the
command prompt, type:
$ /nas/tools/automaticcollection -disable -all
EMC Customer Service and support provider examples
The following describe the functions you might perform if asked to do so by EMC
Customer Service or an authorized support provider:
◆ To run the collection script for logs, at the command prompt, type:
$ /nas/tools/automaticcollection -getlogs
◆ To run the transfer script for dumps, at the command prompt, type:
$ /nas/tools/automaticcollection -retrievedump -slot
<slot_ ID>
◆ To run the transfer script for logs, at the command prompt, type:
$ /nas/tools/automaticcollection -transferlogs
◆ To display the current configuration, at the command prompt, type:
$ /nas/tools/automaticcollection -config
◆ To check the state of the transfer script, at the command prompt, type:
$ /nas/tools/automaticcollection -info