System information

VNX™ System Operations30 of 114 Release 7.0
11. Does the VG2 or VG8 server cabinet contain other equipment that is connected to the
cabinet PDPs and shared with other systems (such as Fibre Channel switches, storage
arrays, and so forth)?
If yes, stop here. The VG2 or VG8 server is powered down.
If no, go to the next step.
12. Turn off (0 position) the left and right cabinet circuit-breaker switches located at the back
of the cabinet near the bottom to complete the powerdown of the VG2 or VG8 server.
Note: If the server is installed in a non-EMC cabinet, the switches are probably in a
different location.
CAUTION
!
To avoid service disruption to other clients, do not turn off the two cabinet circuit-
breaker switches when the cabinet contains other equipment powered by these
switches that either services other clients or is not part of the VG2/VG8 server.
Step Action
Rear view
Cabinet
circuit-breaker
switches
CNS-000633
ON
OFF
ON
I
O
OFF
I I
O O