System information

51 of 114Release 7.0VNX™ System Operations
Halt the Data Movers
The following procedure explains how to perform an orderly, timed, or immediate
halt of a network server’s Data Mover or blade.
This procedure applies to all VNX
unified and VNX for file systems
.
Note: A Data Mover for a VNX for file server is also called a blade. There is no functional
difference between a Data Mover and a blade. They both serve the same purpose in a VNX
for file server.
Action
To immediately halt a Data Mover or blade, use this command syntax:
$ server_cpu <movername> -halt <time>
where:
<movername> = name of the Data Mover or blade
<time> = when the Data Mover or blade is to be halted, specified as one of the following:
{ now | +<min> | <hour>:<min> }
Example:
To halt server_5 immediately, type:
$ server_cpu server_5 -halt now
Output
server_5 : done