System information

VNX™ System Operations54 of 114 Release 7.0
Output
Check Version:6.0.36.0
Check Command:/nas/bin/nas_checkup
Check Log :/nas/log/checkup-run.100527-135002.log
---------------------------------Checks---------------------------------
Control Station: Checking statistics groups database............... Pass
Control Station: Checking if file system usage is under limit....... Pass
Control Station: Checking if NAS Storage API is installed correctly. Pass
Control Station: Checking if NBS service is started................ Pass
Control Station: Checking if PXE service is stopped................ Pass
...
Blades : Checking boot files............................... Pass
Blades : Checking if primary is active..................... Pass
Blades : Checking if root filesystem is too large.......... Pass
Blades : Checking if root filesystem has enough free space. Pass
Blades : Checking if using standard DART image............. Pass
...
Storage System : Checking disk emulation type...................... Pass
Storage System : Checking disk high availability access............ Pass
Storage System : Checking disks read cache enabled................. Pass
Storage System : Checking if access logix is enabled............... Pass
...
------------------------------------------------------------------------
One or more errors have occurred. Follow the instructions provided to
correct the problem and try again.
------------------------------Information-------------------------------
Blades : Check if each primary Blade has standby
Information HC_DM_27390050394: The following primary Blade(s)
server_2, server_3 do(es) not have a standby Blade configured. It is
recommended that each primary Blade have a standby configured for it
with automatic failover policy for high availability.
------------------------------------------------------------------------
--------------------------------Warnings--------------------------------
Control Station: Check all callhome files delivered
Warning HC_CS_18800050326: There are 13 undelivered Call Home incidents
in the /nas/log/ConnectHome directory(es)
Action :
Check the /nas/log/connectemc/ConnectEMC log to ensure the connection
is established correctly. To test your Callhome configuration, you can
run /nas/sbin/nas_connecthome -test { -email_1 | -email_2 | -ftp_1 |
-ftp_2 | -modem_1 | -modem_2 } command. View the RSC*.xml files under
the /nas/log/ConnectHome directory(es) and inspect the CDATA content
to find out and possibly resolve the problem. To remove the call home
incidents, run the command "/nas/sbin/nas_connecthome -service clear".
Otherwise escalate this issue through your support organization.
------------------------------------------------------------------------