System information

73 of 114Release 7.0VNX™ System Operations
6. Set the values for the Email transfer ConnectHome option:
a. Use the Email Priority drop-down list to set or modify email as a primary, secondary,
or tertiary transport mechanism.
Specifying disabled removes email as a transport mechanism.
b. In the Email-SMTP field, type the fully qualified domain name or IP address primary
of the email server. You cannot enter more than 63 characters.
c. In the Subject field, set or modify the subject of the email message. You cannot
enter more than 127 characters.
d. In the Recipient Address (es) field, set or modify the destination email addresses
that receive event files. You cannot enter more than 255 characters.
EMC recommends that you do not change the default /EMC recipient address
[e-mail] unless other specified by your authorized service provider.
e. In the Sender Email Address field, accept or modify the sender email address.
f. It is important to note that email can be forwarded through your email server. In this
case, the Email server will require a valid mail user.
7. Set the values for the FTP transfer ConnectHome option:
a. Under FTP, use the FTP Priority drop-down list to set or modify FTP as a primary,
secondary, or tertiary transport mechanism.
Specifying disabled removes FTP as a transport mechanism.
b. In the FTP Server field, type the IP address of the ESRS Gateway FTP server. This
is where event files will be transferred.
c. In the FTP Port field, set or modify the corresponding primary FTP port.
d. In the User Name field, set or modify the username of the login account on the
primary FTP server. You cannot enter more than 15 characters.
e. In the Password field, set or modify the password of the login account on the primary
FTP server. You cannot enter more than 15 characters.
f. In the Remote Location field, set or modify the remote directory path on the FTP
server where event files will be deposited. You cannot enter more than 63
characters.
g. In the Transfer Mode field, set or modify the transfer mode of the primary FTP
transport mechanism.
8. Set the values for the Modem transfer ConnectHome option:
a. Use the Modem Priority drop-down list to set or modify the modem as a primary,
secondary, or tertiary transport mechanism.
If there is no modem, select Disabled.
b. Set the primary and secondary, optional, numbers.
By default, the modem uses a dialing prefix of 9 to get an outside line, and then dials
an 1-800 number. You do not need to change the number in the Number to Dial
Out field if you are configuring ConnectHome on a system in the US or Canada.
Review the list of International toll-free numbers if you are configuring Connect Home
on a system outside of the US or Canada.
9. Click Apply.
You should check each activated delivery method.
Step Action