System information

VNX™ System Operations96 of 114 Release 7.0
Standard parameters
and settings when
binding LUNs
These parameters or settings must be enabled or disabled as follows:
• Enable write cache
• Enable read cache
• Disable auto-assign for each LUN
• Disable clariion no_tresspass
• Disable failovermode
• Disable arraycommpath
!
CAUTION
!
To prevent file system corruption, the arraycommpath
setting should not be changed while the server is online.
The server should be taken offline to change this setting.
EMC MirrorView™,
EMC SnapView™, and
EMC SAN Copy™
VNX for block, MirrorView, SnapView, and SAN Copy are not supported
on NAS-allocated LUNs.
Table 10 VNX for file/VNX for block NAS and SAN environment considerations (page 3 of 3)
Category Considerations