Installation Instructions

7
Stabilizer calibration
Initialization calibration is required when
the stabilizer is:
After starting, the phone is not horizontally angled
Use ambient temperature changes vary greatly
Small angle adjustment in the horizontal direction at rest
down
up
First, put it on the plane,
the phone is in balance
The rocker goes down, then turns it on again,
the joystick continues to hold
After about 2 seconds down, click the camera
button. The blue light flashes.
Indicates that calibration is started. The gimbal
is stationary for about 10 seconds.
If the blue light is always on, the calibration is
successful, otherwise it fails.
After the calibration is completed, shut down
and restart.
1
2
306
38
168
46
97
Tensile(max)
unit:mm
123
95
parameter