Installation Guide

8
Duplicate keys can be made by your nearest home improvement store
or locksmith.
IIMMPPOORRTTAANNTT
8. INSTALL HANDLE SET:
A. Follow the instructions included in the hardware kit box packed with your door.
9. INSTALL CLOSER:
A. Follow the instructions included in the hardware kit box packed with your door.
10. INSTALL SWEEP:
A. Slide sweep over base of door with mounting slots on inside of door. Center sweep
along the bottom of the door frame. Position sweep so both ends of sweep fin touch door
sill completely.
B. Mark and drill 1/8" pilot holes into door through Sweep Mounting Slots.
C. Secure sweep using the four (4) #8 x 1/2" screws provided.
Do not drill completely through door. This will create an unnecessary
hole in your door and may cause water and air infiltration.
CCAAUUTTIIOONN
CAUTION
!
DOOR
#8x1/2”
SCREW
SWEEP
INTERIOR VIEW
SWEEP
MOUNTING
SLOT
Sweep is intentionally narrower than the door.
NNOOTTIICCEE