Measurement Guide

stormdoors.com
|
1.800.933.3626
p.1
A
Exterior door trim (brick mould)
Storm Door Opening Width
Measure from inside face of brick mould
SILL
ENTRANCE DOOR (closed position)
TOP VIEW
INTERIOR
EXTERIOR
Door frame
(jamb)
A
C
B
Door frame
(jamb)
W1
H
W2
W3
Sill
Exterior
door trim
(brick mould)
Measuring
After selecting the style of door you want,
measure your opening and visit The Home Depot
®
for availability and purchase.
Height
Measure for height (H) from the sill to the
underside of the exterior trim at the top
of the door.
H _____________________________
Record your door height.
Width
Measure the width at the top (W1),
center (W2) and bottom (W3) of the door
opening. Use the shortest measurement
if they vary.
W1 _____ W2 _____ W3 _____
Record your door width.
For double doors, order 2 doors and a
double door kit.
Door Size
Use the charts below to select the
appropriate door size. Be sure to verify
rough opening requirements for the
door you select.
______________________________
Record the door size you need.
Storm Door Size Charts
Need a custom size?
Andersen 27
7
/
8" to 38
3
/
8" 72" to 84
7
/
8"
Andersen XL 27
7
/
8" to 42" 72" to 96"
EMCO 27
7
/
8" to 38
3
/
8" 75" to 84
7
/
8"
EMCO XL 38
7
/
8" to 42" 79" to 91"
To qualify for Andersen Custom XL sizing, only one
of the following conditions must be met:
•Width of opening must exceed 38
3
/
8" or
•Height of opening must exceed 84
7
/
8"
Andersen Custom XL must be specified RH or LH. Ask an
associate for details. For openings up to 1" wider than
those listed, order optional Z-Bar Extender kit. Kits
are also available for double-door installation.
DOOR
SIZE
ROUGH OPENING
WIDTH RANGE
ROUGH OPENING
HEIGHT RANGE
Andersen
®
and EMCO
®
Storm Doors
30" 29
7
/
8" to 30
3
/
8"
32" 31
7
/
8" to 32
3
/
8"
34" 33
7
/
8" to 34
3
/
8"
36" 35
7
/
8" to 36
3
/
8"
DOOR
SIZE*
ROUGH OPENING
WIDTH RANGE**
ROUGH OPENING
HEIGHT RANGE
80" to 80
7
/
8"
for all door sizes*
Verify Rough Opening Requirements
Select a storm door and then verify the minimum space requirements on
your existing door frame to make sure that your new storm door will fit.
A
Exterior door trim (brick mould)
Storm Door Opening Width
Measure from inside face of brick mould
SILL
ENTRANCE DOOR (closed position)
TOP VIEW
INTERIOR
EXTERIOR
Door frame
(jamb)
A
C
B
Door frame
(jamb)
W1
H
W2
W3
Sill
Exterior
door trim
(brick mould)
DIMENSION A

Minimum of ¾"
(1.91cm) for all
storm doors; except
the 75 Series and
Forever®Storm Doors
which require 1"
(2.54cm).
DIMENSION B

Minimum of 1"
(2.54cm) required
DIMENSION C

Minimum of 2 ½"
(6.35cm) required
For more information visit stormdoors.com
“Andersen” and all other marks are trademarks of Andersen Corporation and its subsidiary. Andersen Storm Door Division is a wholly owned subsidiary of Andersen Corporation that manufactures the
storm doors in this brochure and supports the limited warranties. “The Home Depot” and The Home Depot logos are trademarks of Homer TLC, Inc.
©2015 Andersen Corporation. All rights reserved. 3/2015
EMCO
®
Forever
®
Storm Doors
30" 30" to 30
3
/
8"
32" 32" to 32
3
/
8"
36" 36" to 36
3
/
8"
80" to 80
7
/
8"
for all door sizes*
DOOR
SIZE*
ROUGH OPENING
WIDTH RANGE
ROUGH OPENING
HEIGHT RANGE
* The actual door slab dimensions will be approximately 3/4" less
than the door size (e.g., on a 36" door, the slab is 35 1/4" wide).
Measure Your Doorway