Measurement Guide

STORM DOOR MEASURE GUIDE FOUR EASY STEPS
Determine the size you need based on the door opening
measurments and the storm door model that is selected
Choose the door handing that
works best for your entryway
Measure door opening in order to determine the
size storm door you need
Check to ensure door opening and trim allow enough space for a storm door
2
1
3
4
DIMENSION A
:
Minimum ¾"
width at trim surface required
(Please Note: 75 Series and Forever®
Storm Doors require a minimum of 1")
DIMENSION B
:
Minimum 1"
trim (brickmould) depth required
DIMENSION C
:
Minimum of 2½"
door frame (jamb) depth required
*
* Note: Depending on the depth and location of your entry
door handle set, additional clearance may be needed.
Measure the width of the door opening at the inside
face of exterior trim on each side at top, center &
bottom and record the shortest measurement.
(see measure points W1, W2 & W3 in the illustration)
If you choose an Andersen 4000 or 3000 Series Storm Door
with the 45 Minute Easy Install System, handing will need
to be specified at the time of purchase.
If your measurements are outside the standard width or height ranges shown above, you will require a custom size door
*
.
*
Measure for the height from the sill to the
under- side of the brickmould at the top
(see measure point H in the illustration)
A
Exterior door trim (brickmould)
Storm Door Opening Width
Measure from inside face of brickmould
SILL
ENTRANCE DOOR (closed position)
TOP VIEW
INTERIOR
EXTERIOR
Door frame
(jamb)
A
C
B
H
H
W1
W2
W3
DOOR
SILL
EXTERIOR
TRIM
(BRICKMOULD)
DOOR
FRAME
(JAMB)
EXTERIOR TRIM
(BRICKMOULD)
STANDARD DOOR SIZE
WIDTH RANGES:
30" 32" 34" 36"
Andersen 4000 & 3000 Series Storm
Doors with 45 Minute Easy Install System
29 7/8"
TO
30 3/8”
31 7/8"
TO
32 3/8”
33 7/8"
TO
34 3/8”
35 7/8"
TO
36 3/8”
Andersen 3000 TruEase, 2500 & 2000 Series
and EMCO Storm Doors
(excluding Forever
®
)
29 3/4"
TO
30 3/8”
31 3/4"
TO
32 3/8”
33 3/4"
TO
34 3/8”
35 3/4"
TO
36 3/8”
Andersen Custom Door Opening WIDTHS:
27 7/8" TO 42 3/8"
Andersen Custom Door Opening HEIGHTS:
72" TO 96 7/8"
EMCO Custom Door Opening WIDTHS:
27 7/8" TO 42 3/8"
EMCO Custom Door Opening HEIGHTS:
75" TO 91 7/8"
STANDARD DOOR SIZE
HEIGHT RANGES:
80"
X
80"
TO
80 7/8”
X
80"
TO
80 7/8”
RECORD YOUR SHORTEST
WIDTH MEASUREMENT:
W:
RECORD YOUR
HEIGHT MEASUREMENT:
H:
** Select storm door models and select options are not available in custom sizes.
Left Handed (LH) Right Handed (RH)
EXTERIOR
VIEW
For additional measuring and installing tips visit stormdoors.com/measure or text MEASURE to 24587