EME Self-Monitoring Blood Glucose System User’s Manual Please read this User’s Manual thoroughly Before using your blood glucose meter
Dear EME SMBG System Owner, Thank you for using the EME Self-Monitoring Blood Glucose (SMBG) System. We designed this system to be dependable, easy-to-use, compact, lightweight and portable to help you monitor your blood glucose on a regular basis. Please read this manual thoroughly before you begin testing. This manual provides you and your diabetes care team with important information and step-by-step direction to use the EME Self-Monitoring Blood Glucose System. Thanks again for choosing the EME SMBG.
Important Safety Instructions Lancets and meters are for single use only. A new, sterile lancet should be used each time you perform a test. The lancing device, lancets and meter are NOT to be shared between users or other family members. Do NOT use on multiple individuals. Sharing a lancing device and lancets may transmit blood borne pathogens, such as viral hepatitis. All parts of the kit are considered biohazardous and may transmit infection, even if you have performed cleaning and disinfection.
Standard Accessories The EME Blood Glucose meter and accessories are working together to measure the amount of glucose in your blood. The system includes: • User’s Manual • Quick Reference Guide • Log Book • Level 2 Control Solution • Control Solution Instructions • Test Strip Instructions • Blood Glucose Meter • 10 Test Strips • Carrying Case • 2 Alkaline Batteries • 10 Lancets • Lancing Device • AST Lancing Device Cap Optional Accessories • Level 3 Control Solution Note: 1.
Why is it so important to test blood glucose regularly? Testing your blood glucose regularly can make a big difference in how you manage your diabetes every day. We have made this SMBG system as simple as possible to help you use it regularly. Your meter is easy to use, and you can adjust the lancing device for your comfort. Do you need help? If you have questions or need assistance, please call the Customer Care Service toll-free at 866-994-3345 (Eastern Time, Mon-Fri 9:00AM~5:00PM).
Important Information about Your New Meter EME blood glucose meter is designed and approved for testing fresh capillary whole blood samples from your fingertip palm, and forearm. The meter is for in vitro diagnostic use ONLY (for testing outside the body). It should not be used to diagnose or screen for diabetes. EME blood glucose meter can only be used with EME Blood Glucose Test Strips. Other test strips will give inaccurate results. Testing is not valid for neonatal blood specimens.
Note: Consult with your healthcare professional before testing on your palm and forearm. Do not touch the strips with wet hands. Do not use expired strips (the expiration date is shown on the bottle.) Do not bend, cut or twist the strips. Up to the altitude of 10,000 feet has effect on readings.
Health-Related Information If you are experiencing dehydration, frequent urination, low blood pressure, shock or hyperosmolar hyperglycemic nonketotic coma (HHNKC), you may get a test result that is lower than what your blood glucose really is. If you think you are dehydrated, call your doctor right away. If you have followed the steps in the user’s manual, but still have symptoms that don’t seem to match your test results, contact your Healthcare Professional or physician immediately.
Table of Contents Chapter 1: Understanding Your Meter ….......................................................................................................11 The EME Blood Glucose Meter …..............................................................................................................11 The EME Accessories …..........................................................................................................................13 Installing Batteries ….........................................
Symptoms of High or Low Blood Glucose …..............................................................................................35 Comparing Your Meter Result to Lab Results …........................................................................................36 Chapter 4: Meter Memory, Setup …...............................................................................................................37 Memory, Storing Test Results ….................................................................
Chapter 1: Understanding Your Meter The EME Blood Glucose Meter Test Strip SlotInsert test strip here. Strip EnjectorPush the Strip Ejector to remove the strip. DisplayShows results, messages, and results stored in memory. Left () ButtonsPress to enter memory, adjust setting, and scroll through results. Right () Buttons- Press to turn the meter on, confirm setting, and scroll through results.
Folder Symbol Date Meaning Show the moment of month and day. Time Show the moment of time. Test result Show the test result. AM Tracking all the test results or average of /14/30/90 days. Control Solution test and the result is not included in the memory. Indicate before noon PM Indicate after noon Record/Average display Control Solution AC = ante cibos When the battery symbol appears, prepare new batteries for installation.
The EME Accessories Test Strip Bottle Test Strip Sliding barrel Pull on until it clicks and then release to enable lancing device. Electrode Strip Insert Direction SleeveHand Hold Area Trigger buttonPress the trigger button to activate the lancing device Hand Hold Area HubUnscrew or Recap the Cap.
Installing Batteries 1. Open the battery door on the back of the meter by pushing the tab in the direction of the arrow and pulling the door up. 2. Insert two batteries and the meter beeps. 14 3. Put the battery door back in place and snap it closed. The meter turns on automatically.
Setting The Time and Date - First Time Use Setting the current time and date in your meter is important if you use the meter memory. 1. Press (right button) to turn the meter on. 2. The display shows the last 2-digit of the year that flashes at the top of display as well. Press (left button) to adjust the year and press (right button) to confirm the setting. 15 3. Repeat step 2 to set the date and time. The flashing field is the one you are currently setting.
Using EME Blood Glucose Test Strips Use only with EME Blood Glucose Meters. Run a control solution test every time you open a new box of test strips (See Chapter 2 "Control Solution Testing.") Keep the test strips in their original bottle. After you take a test strip out of the bottle, tightly close the bottle immediately. This keeps the test strips dry. Use the test strip within three minutes after taking it out of the bottle. The strip is for single use only. Do not reuse it.
Chapter 2: Control Solution Testing Why Run a Control Solution Test We recommend that you run the EME level 2 and level 3 control test because it lets you know that your meter and test strips are working properly to give reliable results. You should run the control solution tests when: You use the EME Blood Glucose Meter for the first time. You open a new bottle of test strips. You think the meter or test strips may be working incorrectly. You drop the meter.
About The Control Solutions Use with EME test strips. Write the date you opened the control solution bottle on the bottle label. The control solutions are good for three months from the date the bottle is opened or until the expiration date on the bottle, whichever comes first. Do not use a control solution that is past the expiration date. Control solutions can stain clothing. If you spill the solution, wash your clothes with soap and water. Close the bottle tightly after every use.
Running a Control Solution Test You need the meter, a test strip, and control solution. 1. Put a test trip into the meter as the direction of the arrow on the test strip. The meter turns on automatically. 2. Press (left button) to set (AC), (PC) or CS Mode, then press (right button) to confirm the setting. 19 3. The icons and show themselves.
4. Place the meter on a flat surface, like a table. 5. Remove the control solution bottle cap and wipe the tip of the bottle with a tissue. 6. Squeeze the bottle until a tiny drop forms at the tip of the bottle. 7. Touch the drop at the tip of the test strip. 8. The meter starts to count down from 5 seconds and then shows the test result. 20 9. Do not remove the test strip yet. Check if the reading falls within the range printed on the test strip bottle.
10. Push the Strip Ejector to Remove the test strip. 11. Throw the test strip away after you have compared the reading to the range printed on the test strip bottle.
Understanding Control Solution Test Results The label on your test strip bottle shows the acceptable ranges for the Control Solutions. The result you get should be inside this range. Make sure you compare the result to the correct level of control. When the control solution result is inside the range on the test strip bottle, your test strips and your meter are working properly.
Troubleshooting Checks Action 9 Was the test strip exposed to open air for a long period of time? Repeat the control test with properly stored strips. 9 Does the cap on the bottle keep tightly prevent moisture or humidity from affecting strips? If the cap was not tight, or the bottle was left uncapped, open a new bottle of test strips. Do not reuse the strips from the affected bottle.
Chapter 3: Testing Your Blood Glucose Using the Lancing Device The best depth setting is the lowest number that draws enough blood for a test. Try different settings to find the one that’s right for you. Please do not share your lancing device with anyone. And always use a new, sterile lancet. Lancets are for one time use only.
Inserting a Lancet into the Lancing Device You must first load the lancet into the lancing device to get it ready for use. 1. Unscrew the Cap. 2. Insert the lancet into the lancing device firmly then twist off the protective cover. 3. Recap the front cap. Note: Lancets are for single use only and a new, sterile lancet should be used each time you perform a test.
4. Select the desired penetration depth. 5. Pull on the sliding barrel of the lancing device until it clicks and then release. Now the lancing device is ready. Do not prick your finger until your meter and strip are prepared. 6. Set the lancing device aside until later in the test. Note: 1. Select 1-2 for soft or thin skin, 3 for average, and 4-5 for thick or calloused skin. 2. Lancing device and lancets are not to be shared between users.
Running a Blood Glucose Test with Blood from Your Fingertip 1. Wash your hands with soap and warm water. Rinse and dry thoroughly. 2. Put a test strip into the meter in the direction of the arrow. The meter turns on automatically. 27 3. Press (left button) to set (AC) or (PC) Mode, then press (right button) to confirm the setting.
4. The icons and show themselves. When the blood drop flashes on the display, obtain a drop of blood from your finger. 5. Hold the lancing device firmly against the side of your finger. Press the trigger button. Then remove the lancing device from your finger. 6. Gently squeeze and/or massage your fingertip until a round drop of blood on your fingertip. 7. Wipe away the first drop with a tissue and use the second drop. Note: please make sure to apply blood when the blood drop appears on the display.
8. Touch the drop to the tip of the transparent window of the test strip. Do not put blood on top of the strip. Be sure to get enough blood in the strip’s confirmation window. Otherwise, an inaccurate reading may yield. 9. The meter starts to count down from 5 seconds and then shows the test result. 29 10. Push the Strip Ejector to remove the test strip. 11. Throw it away after you have compared the reading to the range printed on the test strip bottle.
Alternative Site Testing (AST) Understanding Alternative Site Testing What is AST? Besides the fingertip, you can test your palm or forearm. What is the advantage of AST? You have the option of testing other places on your body besides the fingertip. Consult your health care professional before you begin using the palm or forearm for testing. Blood glucose test results obtained from your palm or forearm may differ significantly from fingertip samples.
Fingertip test only: If sick If blood glucose is low After exercising Two hours or less after eating After injecting rapid-acting insulin (two hours or less) What NOT to do: If the blood glucose test result from the alternative site test does not match how you feel, do a fingertip test to confirm the result again. Do NOT change your treatment just because of an alternative site result, do a fingertip test to confirm the result.
Running a Blood Glucose Test with Blood from Your Palm or Forearm Please use the clear cap with the lancing device for AST testing 1. Massage the puncture area of forearm for a few seconds. 2. Press and hold the device with clear adjustable tip against the forearm. Note: 1. Check with your healthcare professional before testing sites other that the fingertip. 2. Please do NOT use the first drop of blood sample. 32 3. Press the trigger button to activate the lancing device.
Discarding Used Lancets 1. Unscrew and remove the adjustable cap. 2. Pull on the sliding barrel of the lancing device and slide the ejection control at the same time. The used lancet will be pushed out. 33 3. Discard used disposable lancets into an appropriate sharps or biohazard container.
Expected Values* The EME Blood Glucose test strips are whole-blood referenced and calibrated for easier comparison to lab results. The American Diabetes Association recommends the following values to normal people without diabetes*: A post-meal glucose level of less than 180 mg/dL A pre-meal glucose of 70–130 mg/dL For people with diabetes: please consult with your doctor for the appropriate blood glucose range.
Comparing Your Meter Result to a Lab Result A common question is how the blood glucose results on your meter compare to the lab results. Your blood glucose can change quickly, especially after eating, taking medication, or exercising. If you test yourself in the morning, then go to the doctor’s office for a blood glucose test. The results will probably not match, even if you are fasting. This is typically not a problem with your meter, it just means that time has elapsed and your blood glucose has changed.
Chapter 4: Meter Memory, Setup Memory, Storing Test Results Your meter stores a maximum of 480 test results with the time and date of the test. You can review them at any time. When the memory is full, the oldest result is dropped as the newest is added, so it is very important to have the correct time and date set in the meter. Note: 1. Do not change your therapy based on one individual result in memory. 2. The memory is not lost when you replace the battery.
Viewing Test Results The meter provides 7, 14, 30 and 90 days averaging to help track your blood glucose result soundlessly. 4. Press to view averages of 30day-AC/PC and 7/14/30/90 days. 1. Press until turning the meter on. 2. Press to view the latest test result. 3. All results are shown in turn from records of M480 to M001.
Chapter 5: Maintenance and Troubleshooting Installing Batteries The meter uses two alkaline 1.5V (AAA) batteries. Batteries will normally last for more than 2000 tests. Other types of 1.5V (AAA) batteries are also acceptable, but the capacity of test times may differ. Install the batteries when you first use the meter or replace with new batteries when the "LP" (low power) message and the low battery symbol appear on the display. The meter will not turn on the first time batteries are installed.
Cleaning and Disinfecting Your Meter and Lancing Device Choosing the disinfectant The recommended EPA-registered disinfected product is as follow: PDI® Super SANI-CLOTH® Germicidal disposable wipe (EPA Reg. No.
Cleaning Instruction: All blood and other body fluids must be thoroughly cleaned from surfaces and objects before disinfection by the germicidal wipe. Open, unfold and use first germicidal wipe to remove heavy soil after every use. Disinfection Instruction: Unfold a clean wipe and thoroughly wet all the surface of the meter, including the strip port and other connection port. Unfold a clean wipe and thoroughly wet all the surface of the lancing device, including cap or AST cap if used.
Physical Appearance check of the meter after each cleaning or disinfection Check item Accept Result Is it clear to see through the transparency part, like display? Yes Is the strip slot and other components free from erosion? Yes Is the labeling on the meter legible? Yes Action: If any of the results is “No” the user should call the Customer Care Service toll-free at 866-994-3345(Eastern Time, Mon-Fri 9:00AM~5:00PM) for assistance.
After each disinfection 1. Insert test strip 2. Apply Level 2 control solution Is the meter powered on? Yes Any reading? Yes Is the reading within control range? Yes 3. Remove test strip Is the meter powered off? Yes 4. Press and hold left Is the meter powered on? Yes button for 3 sec. Did the meter beep? Yes 5. Press and release right Is the testing result correctly stored in the memory? Yes button. Can the result be clearly read? Yes Action: If any of the results is “No”, stop using the device.
Performance check of the Lancing device Step Check item Accept Result After each cleaning 1.Cap the normal cap to the lancing device. 2. Pull on the sliding barrel and then release. 3. Press trigger button. Can the cap be screwed on the lancing device? Can the lancing device click? Yes Yes Can the lancet be fired? Yes After each disinfection 1. Install the lancet on the lancet holder. 2. Cap the AST cap to the lancing device. 3. Remove the AST cap. Recap the normal cap to the lancing device.
Cleaning and Disinfection Frequency At least 9 cycles of cleaning per day and 1 cycle of disinfection per week with allow the user to use the device for 4 years. The meter can sustain at least 20,000 cycles of cleaning and disinfection and the lancing device can sustain at least 14,600 cycles of cleaning and disinfection.
Maintenance and Testing Your meter needs little or no maintenance with normal use. It automatically tests its own systems every time you turn it on and lets you know if something is wrong. (See "Screen Messages" and what to do about them.) To make sure the display is working properly, turn off the meter. Press and hold “” to see the complete display. All the indicators should be clear and look exactly like the picture to the left.
Screen Messages and Troubleshooting Never make treatment decisions based on an error message. If you have any concerns, please call the Customer Care Service toll-free at 866-994-3345 (Eastern Time, Mon-Fri 9:00AM~5:00PM). Humidified/Used strips Action: Replace with a new strip. Low power Action: Replace with new batteries. 46 System fault Action: Replace the batteries first.
System fault Action: Replace the batteries first. If Err appears again, please call the Customer Care Service toll-free at 866-994-3345 (Eastern Time, Mon-Fri 9:00AM~5:00PM). During non-service hours, please contact your local dealer. Test result is higher than 600 mg/dL. Action: Test again. If the result is still the same, try a control solution test and if the control solution test falls within the correct range, please call your health care provider. 47 The test result is lower than 20 mg/dL.
Err message. Not enough sample was drawn into the test strip for measurement. Action: Discard the test strip and repeat the test.. The ”Ht” and thermometer icon appears. Temperature is too high, outside the required range of 10°C - 40°C (50°F 104°F). This alerts users that an incorrect result may occur if the test continues. Action: Relocate the meter to a location with temperature between 10°C - 40°C (50°F 104°F). 48 The ”Lt” and thermometer icon appears.
Chapter 6: Technical Information Specifications Brand name Range Response time Memory sets Operating condition Storage and transportation condition Temp. Relative Humidity Temp. Relative Humidity Blood sample Hematocrit (Hct) Power Battery life Display dimension Device dimension H × W × D (mm) Weight Principles EME Blood Glucose Meter 20~600 mg/dL 5 seconds 480 test results 50°F -104°F (10°C-40°C) R.H. ≦ 90% 35.6°F -86°F (2°C -30°C) 40-85 % RH 0.
Limitations The test strips are used for fresh capillary whole blood samples. 1. DO NOT use neonate blood sample. 2. Not to be used for diagnosis or screening of diabetes. 3. Alternative site testing with this system can be used only during steady-state blood glucose conditions. 4. Measurements from alternative site testing should never be used to calibrate a continuous glucose monitor (CGM) or entered into insulin dose calculators for insulin dosing recommendations. 5.
Galactose Maltose Manose Sucrose Xylitol Glipizide Bilirubin Cholesterol Creatinine Triglycerides Fructose 20 20 10 50 200 8 25 500 30 1000 30 11. Interference was observed with the substances below at the concentrations listed. Interfering substance Interference observed at (mg/dL) Acetaminophen 8 Dopamine 5.2 L-Dopa 4 Xylose 8 Uric Acid 15.
Device Information EME SMBG System, EME Blood Glucose Test Strips, EME Blood Glucose Meter, EME Level 2 Control Solution, EME Level 3 Control Solution Reference: * American Diabetes Association. Standards of medical care in diabetes-Table 10 Diabetes care. 2011; Vol. 34, Suppl. 1, S21. Manufacturer: EPS BIO TECHNOLOGY CORP. No.8, R&D RD. III, Hsinchu Science Park, Hsinchu, Taiwan 30077 TEL：+886-3-6686868 FAX：+886-3-6686866 E-mail：info@epsbio.com.tw Website：http://www.epsbio.com.
Lancing Device Meets the requirements of MDD 93/42/EEC Manufacturer: STERILANCE MEDICAL (SUZHOU) INC. No. 32 Xinlian RD. Pingjiang Suzhou P.R. China 215031 TEL：0086 (512) 67217661 FAX：0086 (512) 67217663 E-mail：guopings@xinda-medical.com Lancet Meets the requirements of MDD 93/42/EEC Manufacturer: SAE HAN MEDICAL CORP. # 700-113 PUB GOT-DONG, IL SAN-GU, GOYANG-CITY, KYUNGGI-DO, KOREA TEL：82-31-923-4330 FAX：82-31-923-4331 E-mail：saehan@saehanmed.
Warranty EPS warrants the original purchaser for a period of 3 years from the date of purchase. This means during the warranty period if the Self-Monitoring Blood Glucose System does not work for any reason (other than obvious abuse), EPS will replace it with a new system or an equivalent product free of charge. Please read EME User’s Manual before operation.
