Buttons 15 ① ② ③ ⑤ ④ ⑥ ⑨ ⑧ 16 ⑦ 10 14 11 17 13 12 Overview ① VoiceIA button ⑦ Power button 13 ② Bluetooth button ⑧ Status LED 14 USB port (Type C) ③ Answer/End Phone ⑨ Source LED 15 Dongle ④ Volume＋ button ⑩ Rubber plug 16 Nameplate ⑤ Volume－ button 11 LOCK port 17 MIC hole ⑥ Mute button 12 Headset output port Call button 1 LINK Daisy Chain port
Power On/Off Power on/off Press and hold Check battery level 25% Press the power button when powered on. 50% 75% 100% The Status LED turns green to indicate the battery level. Low battery warning The Status LED turns red to indicate low battery.
VoiceIA Button Short press “ ”AI Noise Reduction button to enable/disable AI noise function. Turning on VoiceIA® noise reduction can greatly reduce some noises in the meeting scene, such as from keyboard tapping, air conditioning noise, and general unwanted background noise. Turn on/off VoiceIA intelligent noise reduction. Press 3m(9.8ft) 1.5m(4.
Answer/End Phone Call Button Status Action Status Incoming call Press Answer a call Incoming call Press and hold Reject a call Call going Press/press and hold End a call Volume＋/Volume－ Button Action Status LED Press Volume up Status LED turns blue Press Volume down Status LED turns blue 4
Bluetooth Connection Action Press and hold Enter Bluetooth pairing mode Press Status Source LED Bluetooth paired Steady blue Bluetooth not paired Flashes blue Bluetooth closed/reconnected Steady white LED Notes: a) When turning on the device, it will reconnect to the last computer/mobile phone via Bluetooth whilst it is active. b) Bluetooth closed means it can not be found. USB Connection Connect to your computer by using a USB cable. The Source LED turns green when USB cable is connected.
USB Dongle Connection Connect to your computer by using a USB Dongle. The Source LED turns blue when USB Dongle is connected. Dongle status Dongle LED Pairing Flashes blue Pairing successful Steady blue Call going Green Microphone muted Steady red LED Headset Connection LINK When the headset is connected, the Source LED turns yellow. 3.5mm Connect to the headset jack using a 3.5mm headset cable. Note: When the headset is connected, the speaker is automatically muted.
Daisy Chain Cable The Source LED turns cyan when Daisy Chain connected. LINK LINK LINK LINK Daisy-Chain can be carried out by connecting the LINK ports of two products using an eMeet Daisy Chain cable. Daisy-Chain Before 8 people Daisy-Chain After 16 people Note: eMeet Daisy Chain cables must be purchased separately. Lock Port Setting LOCK 0 0 0 0 LINK Lock the product through the LOCK port to prevent theft.
Charging Action Source LED Charging in power-off state Yellow-green LED indicator flashing LED Fully charged in power-off state Yellow-green LED indicator always on Download Application Download the eMeet Link PC desktop app for software updates. www.emeet.ai/emeetlink www.emeet.
Product Parameters Charging input 5V/1A Rated power 5W MIC diameter Φ10mm SPK frequency range 20Hz-20KHz Bluetooth version V5.0 Bluetooth range 20m (in an open environment) Note: In case of any change in the specifications, official website information shall prevail.
