Owner`s manual

Power Pack

(continued)

This diagram represents a generic two pump

system. It is not intended to represent any

specific model.

Emerald Spa Owner's Manual

Two-Pump System - Four-Pump System (Vantage Only)

All Emerald Elite, Cygnus and SE dlx models use a two pump system, while the Vantage utilizes a

four pump system. The following is a general description of this system.

1. control panel - (MC-4 shown) 10. water inlet line from spa-pump 2

2. temperature sensor 11. water inlet T-valve - pump 2

3. water inlet T-valve - pump 1 12. air line from blower to spa

4. 2-speed circulation/jets pump 13. air blower

5. ozone generator (optional) 14. ozone tee

6. light 15. control outputs

7. booster pump - pump 2 16. heater

8. water outlet T-valve - pump 2 17. power pack

9. water outlet line to manifold 18. connector plumbing elbow

19. water outlet T-valve - pump 1

20. water inlet line from spa - pump 1

21. auxiliary control panel - (MC-4 only)

22. grounding bar

23. water outlet line to spa

24. fiber optic source (optional)

25. pump control button (3) - (MC-6 only)

The two pumps below are added to the Vantage Spa plumbing

system and are plumbed to their own water manifold

distribution (see diagram on page 13)