Owner`s manual

21
Features and Controls
Spa Side Control
SC-3
for EMERALD CLASSIC
or EMERALD SE Series
Start-up for SC-3 Control
Your spa control has been specifically designed so that by simply connecting the spa to its properly grounded
source, the spa will automatically heat to the set temperature.
Starting the pump:
Press Pump key to turn pump on. Press a second time to change pump speed. A third time turns pump off.
A built-in timer automatically turns pump off after 15 minutes, unless it has been manually deactivated
first.
The "Pump" indicator lights up when pump is on.
Starting blower:
Press Blower key to turn blower on. Pressing a second time turns blower off. A built-in timer automatically
turns blower off after 15 minutes, unless it has been manually deactivated.
The "blower" indicator lights up when blower is on.
Turning the light(s) on:
(depending on your spa configuration)
Spa Light Only : Press Light key to turn light on. Press a second time to turn light off. A built-in timer
automatically turns light off after 2 hours, unless it has been manually deactivated first.
Fiber Light Only : Press Light key to turn fiber light and light wheel on. Press a second time to turn light
wheel off. A third time turns fiber light off. A built-in timer automatically turns fiber light off after 2
hours, unless it has been manually deactivated first.
Spa Light : The "Light indicator lights up when light is on.
Fiber Light : The "Light" indicator flashes when fiber light and light wheel are on. It will be solid when
only the fiber light is on.