Owner`s manual

24
Emerald Spa Owner's Manual
Spa Side Control
MC-2 & MC-4
for ELITE, SE deluxe
or Cygnus Spas
Start-up for MC-2 & MC-4 Controls
Your spa control has been specifically designed so that by simply connecting the spa to its properly grounded
source, the spa will automatically heat to the set temperature.
Starting the pumps:
Press Pump(s) to turn Pump 1 on at low speed. Pressing a second time turns Pump 1 to high speed. A third time
turns Pump 1 & Pump 2 to high speed, then a fourth press turns both pumps off. A built-in timer turns pumps off
after 15 minutes, unless it has been manually deactivated first.
The "Pump 1" icon lights up when Pump 1 is on at high speed. It flashes when Pump 1 is on at low speed.
The "Pump 2" icon lights up when Pump 2 is on.
Starting blower:
Press Blower once to turn blower on at high speed. Pressing a second time turns blower to low speed. A third time
turns blower off. A built-in timer turns blower off after 15 minutes, unless manually deactivated first.
The "Blower" icon lights up when blower is on at high speed. It flashes when blower is on at low speed.
Turning the light on:
Pressing Light key turns light on at high intensity. Pressing a second and third time changes its intensity. Press a
forth time to turn light off. A built-in timer turns light off after 2 hours, unless it has been manually deactivated
first.
The "Light" icon is displayed when light is on at high intensity. It flashes when light is on at medium and
low intensity.