Owner`s manual

Spa Side Control

MC-2 & MC-4

for ELITE, SE deluxe

or Cygnus Spas

Programming

[continued]

Emerald Spa Owner's Manual

Digital control pad lockout

(continued)

Locking your digital control pad:

1- Press and hold Pump 1 key for 5 seconds.

2- The display will show LocP, with "P" representing Partial lock.

3- Release the key and the keypad will be in Partial lock mode. Keep key pressed

down for 5 more seconds if you want to be in Full lock mode. The "LocF"

message will then be displayed.

When control pad is locked, all automatic functions of the system run as usual. If a key is pressed

down, a "LocP" or "LocF" message will be displayed for 1 second. To unlock the keypad, simply

press and hold Pump 1 key again for 5 seconds.

Economy mode

Press Mode key to switch from Normal mode to Economy mode. To save energy, the Economy

mode Set Point is 20˚F (11˚C) below the Normal mode Set Point.

The "Economy Mode" icon lights up whenEconomy mode is on.

There are 2 available Economy operating modes:

noEc: No Economy mode

Mode: Economy mode on during a programmed number of hours (see Steps 5 & 6)

Selecting the desired Economy mode:

1- Press and hold Mode key for more than 2 seconds.

2- The display will show the current mode (noEc or Econ ).

3- Keep key pressed down until the desired mode is displayed.

After 5 seconds, the new setting will be programmed.

LocP

LocF