Owner`s manual

30
Emerald Spa Owner's Manual
Spa Side Control
MC-6
VANTAGE SPA
Start-up for MC-6 Control
Your spa control has been specifically designed so that by simply connecting the spa to its properly
grounded source, the spa will automatically heat to the set temperature.
Starting the pumps:
Press Pump 1 to turn Pump 1 on. Pressing a second time turns Pump 1 off. A built-in timer turns pump off
after 15 minutes, unless it has been manually deactivated first.
The "Pump 1" icon lights up when Pump 1 is on.
Press Pump 2 once to turn Pump 2 on. Pressing a second time turns Pump 2 to off. A built-in timer turns
pump off after 15 minutes, unless manually deactivated first.
The "Pump 2" icon lights up when Pump 2 is on.
Press Pump 3 to turn Pump 3 on. Pressing a second time turns Pump 3 off. A built-in timer automatically
turns pump off after 15 minutes, unless manually deactivated first.
The "Pump 2" icon will flash when Pump 3 is on. (note: if pump 2 and pump 3 are on the Pump 2
icon will be on solid)
Starting blower:
Press Blower once to turn blower on at high speed. Pressing a second time turns blower to low speed. A
third time turns blower off. A built-in timer turns blower off after 15 minutes, unless manually deactivated
first.
The "Blower" icon lights up when blower is on at high speed. It flashes when blower is on at low
speed.