Owner`s manual

In-Spa Features
37
Therapy Jets and Controls
Euro Jet *
Micro Cyclone Jet *
Luxury Cyclone Swirl Jet *
Luxury Cyclone
Directional Jet *
3-way Turbo Jet
Turbo Air Control
(Cygnus & Vantage only)
Note:
Other jets may not operate
when the turbo-jet is on.
The Micro allows the barrel to be positioned to deliver
pinpoint therapy to a location. Turn the outer ring to
also moderate the water flowing through the jet.
The Cyclone swirl jet rotates 360 degrees at a rapid
rate thus massaging a larger area. Turn the outer ring
to also moderate the water flowing through the jet.
The Cyclone directional allows the barrel to be posi-
tioned to deliver a broad therapy to a specific location.
Turn the outer ring to also moderate the water flowing
through the jet.
The function of this diverting jet is as follows:
1. When both pumps are engaged and the jet is turned all the
way to the right (the 3 o'clock position) the Turbo and all
other jets except the Tsunami (see next page) are functioning.
2. Whenever pumps are activated and the jet is in the middle
(12 o'clock position), water pressure is realized in all the jets
except the Turbo and Tsunami.
3. When both pumps are engaged and the jet is all the way to
the left (the 9 o'clock position) all the jets in the spa are
working.
Euro jets are fully adjustable and are used in the
Emerald Captain's chair, and various other locations
in some Emerald models.
In-Spa Features
Your spa may be equipped with a variety of therapy jets, controls, and fixtures. Refer to the following charts and identify those
features installed on your spa. NOTE: take care not to turn the jet face beyond the natural stopping point. If this does occur it may
prevent the jet from functioning properly.
Jet face appearance may be subject to change at any time.
* Stainless steel jet option
ON OFF
ON OFF
ON OFF
Adjustable Swirl
Cyclone Jet *
The Super Cyclone features a controllable velocity of
water in either a straight position or in a rotation.
Simply take your finger and click the barrel of the jet
down to cause the nozzle to move in a rotational
pattern.
Air Control
for Turbo Jet
Picture Unavailable Due to .pdf Size Constraints
Picture Unavailable Due to .pdf Size Constraints
Picture Unavailable Due to .pdf Size Constraints
Picture Unavailable Due to .pdf Size Constraints
Pictures Unavailable Due
to .pdf Size Constraints