Owner`s manual

Other Controls and Fixtures
Air Control Valves
Light
Air Injectors
(Not available on Base)
Strip Skimmer
(Emerald Base &
Emerald Classic)
Weir Skimmer
(Emerald Special Edition,
Elite, Cygnus Series & Vantage)
Suction Grate
Warning:
Never block or remove
the suction grate. Do not
use spa if suction grate is
removed!
The air intake valves are located in various locations along the top
coping of the spa. Turn to increase or decrease the amount of air
mixed with the water flow. More air adds to the massage effect.
When the blower is on, air bubbles are released from the injectors
primarily located on the lounger seat and the footwell. These
injectors create a mild vibrating effect that massages the body.
This skimmer is found on Emerald Base and Classic models. Its
purpose is to skim the water surface. Always keep the water level
at least 2/3 high on the skimmer or damage to the system may
result.
This skimmer is found on Emerald Elite, Special Edition, Cygnus
Series and the Vantage Spa. Its purpose is to skim the water surface.
Always keep the water level at 2/3 high on the opening of the skim-
mer or damage to the system may result.
The suction grate is the intake opening for the water circulating
system. This grate protects you from the powerful suction
created by the pump(s) that power your spa.
Aromatherapy Option
(NOT an option
on the Emerald Base)
To use the aromatherapy feature, unscrew the cap and, as the
picture to the right demonstrates, place special aromatherapy
pellet bags inside. The scent will be disbursed primarily while the
blower is operating.
40
Emerald Spa Owner's Manual
This fixture is controlled by the "Light" button on all controllers.
(Optional Fiber Optics pictured to the right).
Picture Unavailable Due
to .pdf Size Constraints
Picture Unavailable Due
to .pdf Size Constraints
Picture Unavailable Due
to .pdf Size Constraints