Owner`s manual

Starting and Using Your Spa

Testing the GFCI

[for spas equipped

with SC-1 (240V)

SC-2, SC-3, MC-2,

MC-4 & MC-6]

Your spa must be provided with a GFCI-circuit breaker located in the power supply panel as installed by

your electrician. Turn on the circuit breaker and test the GFCI by pushing the test button. A red indicator

should appear and your spa should stop operating. Push the reset button and the red indicator should

disappear. The spa should begin to operate normally.

WARNING:

If the GFCI fails to operate in this manner, there is a risk of electric shock! Shut off the main power source.

Identify and correct problem before using the spa.

Carry out a visual inspection to check

for signs of miswiring.

Refer to supplied wiring diagrams at

the back of this manual.