Owner`s manual

21
Light Icon
Set Point Icon
Service Icon
Economy
Mode Icon
Heating
Icon
Program Icon
Filtering
Icon
Progress
bar icon
Time, temperature
& message digits
Pump Icons
AM/FM (F /C )
Smart Winter
Mode Icon
Icon Introduction
Icon
Description
The “Light” icon lights up when the light is on.
The “Filter cycle” icon lights up when lter cycle is
on. It ashes when ltering is suspended.
The “Economy” icon llghts up when lter cycle is on.
The “SWM” icon automatically turns on when freeze
protection is active. It ashes while system purges
the spa plumbing.
A problem has been detected. Do not enter the
water! Spa service is required.
The “Pump” indicator numbers light up and their
icons become animated when pumps are on.
The “heater” icon lights up when lter cycle is on.
A visual indication of the time remaining before
equipment is turned off or before the end of the
standby mode.
The “program” icon lights up when Programming.
The “Set Point” icon automatically turns on when
set point setting menu is activated. It ashes when
1) there is a call for heat and heater has not started
yet 2) heater has just turned off and element is
cooling down 3) if system is performing a ow
check.