Owner`s manual

26
+ /- keys
Use (+) or (-) key to set desired
water temperature. The
tempe-rature setting will be
displayed for 5 seconds to
conrm your new selection.
The "Set Point" icon indicates
that the display shows the
desired temperature, NOT the
current water temperature!
Program key
Use Program key to display
time or enter Programming
menu by pressing and holding
key. In Programming mode,
the following parameters can
be set: time, lter cycle's start
time, duration and frequency,
also, Economy mode's start
time as well as its end time
and nally the choice of
temperature display unit.
Setting the time
Enter Programming mode
by holding Prog. key pressed
down for 3 sec. The display will
show the current time setting.
Setting the hour:
Use (+) or (-) key to change
hour setting (AM/PM).
Setting the minutes:
Press Ok key.
Use (+) or (-) key to change
minutes setting.