Owner`s manual

47
TROUBLESHOOTING
The auto-diagnostic module has multiple detection levels. In.scan
continuously reads current at input to monitor breaker status. It also
identies corrective actions by displaying error codes on the box
display. All errors will be displayed on the keypad and on the in.xm
display.
When displaying error codes, both the device ID and its related error
code are displayed anternately. If there is more than one active error,
the one with the highest priority is displayed rst.
Display with two
7-digit characters
Service menu enabled
Change Button
Select Button
Something is wrong
and the system
should be checked.
Everything is ok!