Owner`s manual

7. Attach power wires to the terminal block. See 240V wiring diagram inside the control enclosure

cover. Attach the wires as follows:

- White wire to terminal #2

- Black wire to terminal #3

- Red wire to terminal #4

- Green wire to terminal #5

8. Complete the conductor connections at the power supply panel.

9. Do not turn power on until instructed to do so in the "Starting and Using Your Spa" section.

240-Volt Power Input

Note:

Consult the Wiring Diagram on Page 53 for 240 Volt to 120 Volt conversion on

the Lite Leader System Only.

Emerald Whirlpool Spa Owner's Manual