Owner`s manual

8. Attach power wires to the terminal block. See 240V wiring

diagram inside the control enclosure cover. Attach the wires as

follows:

- White wire to terminal #2

- Black wire to terminal #3

- Red wire to terminal #4

- Green wire to terminal #5

9. Complete the conductor connections at the power supply panel.

10. Do not turn power on until instructed to do so in the "Starting and

Using Your Spa" section.

240-Volt Power Input

Emerald Whirlpool Spa Owner's Manual

Note:

Consult the Wiring Diagram on Page 53

for 240 Volt to 120 Volt conversion on the

Lite Leader System Only.