Owner`s manual

The equipment compartment houses the "nerve center" of the spa and

includes the following system components.

Pump(s)

Emerald Spas have different pump systems, depending on the spa model.

Emerald Base, Classic and Special Edition spas have a two-speed (circula-

tion/jets) pump and provide:

- Filtration, circulation and heat on low speed.

- Hydrotherapy jet action on high speed for 120V. For 240V, the

spa will also heat in high speed.

The Emerald Elite and Cygnus series have a two pump system which uses

an additional booster pump to enhance jet action.

Blower

Emerald Classic, Elite, Special Edition and Cygnus spas include a blower to

provide bubble therapy and an enhanced force of air to the water jets called

High Performance-Jet Select.

Caution:

T-valves must be open when spa is in use. See Fig. 1.

T-valves must be in closed position before any plumbing is disassembled

for service. See Fig. 2.

T-valves

All one-pump systems have two T-valves, located in the water circulation

lines on either side of the power pack.

Some models have two pumps, which include two additional T-valves

located on either side of the booster pump.

To operate T-Valve:

- To close, temporarily remove security clip and push T-handle

down.

- To open, pull T-handle up and secure with security clip.

Equipment

Compartment

Fig. 2 Fig. 1

Lock Unlock

Open,

Detent (1 1/2"

valve only)

Closed

Open, Detent

Position

Closed, Locked

Position

Emerald Whirlpool Spa Owner's Manual