Owner`s manual

Preset Filter Cycles

Your Lite Leader will automatically filter itself twice each day. The first

filter cycle will begin 1 minute after the Lite Leader is energized. The

second filter cycle will begin 12 hours after the start of the first filter cycle.

The filter cycle is set by the dealer for 2 or 5 hours. The low-speed pump

and ozone generator (if installed) will run during filter cycles.

Center Display Messages

These are some of the messages you may see on the center display.

Overheat (Spa is deactivated)

The spa has shut down. DO NOT ENTER THE WATER!

Turn off all power to the spa and call your dealer or

service organization. To reset the spa, press any panel button.

Flow

A pressure switch is not working. Call your dealer or service

organization.

Sensor

The high-limit sensor or water temperature sensor is not

working. Call your dealer or service organization.

Spa Side Control

Lite Leader

[continued]

Features and Controls