Owner`s manual

Emerald Whirlpool Spa Owner's Manual

Freeze protection

If a freeze condition is detected, the pumps are automati-

cally activated. This is a normal spa function; no action is

necessary. Freeze protection is enabled regardless of the spa's status.

Flow switch

If constantly displayed, a pressure switch has malfunc-

tioned. Contact your dealer or service organization. If the

flow message is flashing : the filter may need cleaning, the water level may

be low, or the T-valves may need to be opened.

Temperature set back

If spa water is more than 20

F cooler than the temperature

last set, no action is required. Spa is functioning properly.

Open Sensor

Spa is deactivated. The high-limit temperature sensor is

not working. This must be repaired only by a dealer or a

qualified service organization.

Open Sensor

Spa is deactivated. The water temperature sensor is

not working. This also must be repaired by a dealer or

qualified service organization.

Standby

Spa is deactivated. The spa can be shut down when the

filter needs to be replaced. Press the "Warm" or "Cool" pad,

then the "Light" pad, and all spa functions will be disabled except for freeze

control. Press any panel button to resume spa operation.

Spa Side Control

Panel DS-2

(continued)