Owner`s manual

Other Controls and Fixtures
Air Control Valves
Light
Air Injectors
(Not available on Lite Leader &
SS-1D controls)
Strip Skimmer
(Emerald Base &
Emerald Classic)
Weir Skimmer
(Emerald Special Edition,
Elite & Cygnus Series)
Suction Grate
Warning:
Never Block or remove the
suction grate. Do not use spa if
suction grate is removed!
The air intake valves are located near the spa
side control panel. Turn to increase or
decrease the amount of air mixed with the
water flow. More air adds to the massage
effect.
When the blower is on, air bubbles are
released from the injectors and create a mild
vibrating effect.
This skimmer is found on Emerald Base and
Classic models featuring Lite Leader, SS-1D
and SS-3D controllers. Its purpose is to skim
the water surface. Always keep the water
level at least 2/3" high on the skimmer or
damage to the system may result.
This skimmer is found on Emerald Elite (DS-
2 controller), Special Edition (SS-3D control-
ler) and Cygnus Series (DS-4 controllers). Its
purpose is to skim the water surface. Always
keep the water level at least half way up the
opening of the skimmer or damage to the
system may result.
The suction grate is the intake opening for
the water circulating system. This grate
protects you from the powerful suction
created by the pump(s) that power your spa.
This fixture is controlled by the "Light"
button on the SS-3D, DS-2 and DS-4 panels.
With the Lite Leader and SS-1D, see the
Lights and Jets section on page 18 for the Lite
Leader control and page 20 for the SS-1D.
OFF
ON
Aromatherapy
(NOT installed
on the Emerald Base)
To use the aromatherapy feature, unscrew the
cap and, as the picture to the right demon-
strates, place special aromatherapy pellets
inside. The scent will be disbursed primarily
while the blower is operating.
34
Emerald Whirlpool Spa Owner's Manual