Owner`s manual

Starting And Using Your Spa

Install Filter Elements

Proper Water Level

Bleeding Air

Testing the GFCI

One-Pump Priming

Two-Pump Priming

Setting the Thermostat

Install Filter Elements

Placing elements in the Filter

1. Unpackage the filter elements located inside the cabinet to be

inserted into the filter.

2. Unscrew the top of the filter canister located on the top of the

coping and insert the element with the largest hole into the

appropriate filter housing.

3. Insert the element with the smaller hole into the filter housing

that accepts it.

4. Insert the Filtering Assist Plug into the middle of the filter

element with the smallest hole. (This procedure allows for water

to penetrate into the interior pleats of the element allowing for

optimal filtration.)

Note:

The Filter Key allows the

loosening/tightening of the filter caps

for filter/spa maintenance. The filter

key's two parallel pegs are inserted

into the filter cap and turned to the

desired open/closed operation. The

removal hook aids in lifting the

elements from the interior of the filter.

Starting and Using Your Spa