Owner`s manual

Emerald Whirlpool Spa Owner's Manual

Caution:

Low water level can damage the water circulating system and void your

warranty. Read and understand all safety, location, and installation

instructions before proceeding.

Add water until level is at appropriate level for your model's skimmer

(see page 34) or damage to system may result.

Proper Water Level

Bleeding Air

Caution:

Air must be bled from the system. Air in the system can damage the spa

and void the warranty.

1. While the spa is off use the filter key to unscrew and remove the

filter caps. This allows for the large pocket of air naturally formed

when the spa was filled with water to escape from the filter cavity.

2. Once the water level inside the filter housing has reached the same

level asthe water inside the spa you can then replace the filter caps.

3. Tighten the filter cap snuggly using the filter key. Be sure not to

overtighten. When the spa is running, you should not see or hear

any water leaking from the spot where the filter top meets the

housing. If you see or hear water escaping turn the spa off and

retighten the filter lid.