Owner`s manual

Setting the Thermostat
Note:
The hot setting on the thermostat
will produce a temperature of
approximately 104
o
F. Initially,
operate your spa at 95
o
F and
cautiously increase the temperature
over a few day period as you become
accustomed to its effect.
WARNING:
Never use the spa at temperatures above 104
o
F.
Temperatures above 104
o
F or prolonged immersion may cause hyperther-
mia. [See "Important Safety Instructions" in the first section of this manual
for a description of the symptoms and effects of hyperthermia.]
For Spas with a Lite Leader, SS-1D or SS-3D Power System: Press the
thermostat button ("set" button for SS-3D) to display the temperature previ-
ously set. Pressing the pad a second time will cause the set
temperature to increase or decrease depending on what direction was last
chosen. Each successive press will change the set temperature in the same
direction. If the opposite direction is desired, release the pad and let the
display revert to the actual water temperature again. Press the pad to
display the set temperature, and again to make the temperature change in
the desired direction.
For Spas with a DS-2 or DS-4 Power System: Press the "Warm or Cool"
temperature key pad until the digital readout indicates a thermostat set
point of 95
o
F.
Starting and Using Your Spa
39