Owner`s manual

Pump does not prime. 1. Circulation T-valve closed.

2. Not enough water in the spa.

3. Air locked. Bleed air as described

previously in this manual. (pg. 36)

Hydrotherapy jets do 1. Filter clogged.

not operate. 2. Pump not primed.

3. Air intake valve(s) closed.

4. Jet venturi nozzles plugged

or missing.

Spa does not heat. 1. Thermostat set too low.

2. Low flow, pump not primed, or

water level too low.

3. Pressure switch not sensing

enough pressure.

4. Heater element defective.

Spa heats, but not to set 1. Spa not covered or covered prop-

temperature. erly sealing the spa cover to the top

edge of the spa. Heat loss is greater

for an uncovered spa. High wind,

low humidity also increase heat

loss.

Problems Things to Check

Spas equipped with

Lite Leader,

SS-1D, SS-3D

Power Systems

[continued]

Troubleshooting