Specifications

5
18. This electrical equipment operates at high temperatures which
may cause burns. Do not touch the filter,
window, metal walls (depending on model), or other apparent
metal parts.
19. To ensure safe operation, oversized foods must not be inserted
into the fryer.
20. Ensure that the lid and bowl are completely dry after washing
and before use.
21. Never immerse the fryer basket into the hot oil - or drain it -
without the fryer lid in place.
22. The oil level must always be between the Min. and Max.
markings.
23. Do not overload the basket. For safety reasons never exceed the
maximum quantity.
24. Never operate your fryer without any oil.
25. The cooking times are given as guidelines only.
26. The oil must be filtered regularly and changed after 8 to 12
uses.
27. Do not mix different types of oil.
28. If you use solid vegetable shortening, cut it into pieces and melt
it over low heat in a separate pot beforehand, then slowly pour
it into the deep fryer pot. Never put solid shortening directly into
the deep fryer pot or basket, as this will lead to deterioration of
the fryer.
29. If the fryer has a removable pot, never remove it while the deep
fryer is on.
30. This model is equipped with a permanent metallic filter, which
does not need to be changed.
31. This appliance is not designed to be used by people (including
children) with a physical, sensory or mental impairment, or
people without knowledge or experience, unless they are
supervised or given prior instructions concerning the use of the
appliance by someone responsible for their safety.
Children must be supervised to ensure that they do not play
with the appliance.
32. If you have any problems, contact the authorized after-sales
service center or the internet address www.t-falusa.com.
Polarization instructions
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.