User's Manual
Page 50
J-400 Series
A. To access the Exterior Solid Color Mode:
1. Press button B to activate the solid color mode. Press again to turn
off.
Note: The default color and intensity will always be the last color and
intensity used.
2. Press either the Left or Right button of the Navigational Quad
Keypad to scroll through or select one of the 7 different colors
(Figure G).
Press the Left button to move forward in the color selections. •
(Blue-Cyan-Green-Yellow-Orange-Red-Purple-Blue).
Press the Right button to move backwards in the color •
selections. (Blue-Purple-Red-Orange-Yellow-Green-Cyan-Blue).
3. The intensity of the lights can be
controlled in both the solid color or
light rotation modes by using the
Navigational Quad Keypad (Figure H):
Press the Up button to increase •
intensity in 25% increments.
Pres• s the Down button to decrease intensity in
25% increments.
As the intensity is increased the bulb will darken to reect the effect.
Note: The intensity range is from 25% to 100%, in increments of 25%.
Intensity defaults to the last setting used.
Blue Cyan
Green
Yellow
Orange
RedPurple
Figure G
25% 50% 75% 100%
Figure H