Manualshelf

User's Manual

ManualsBrandsEmerson Appliance Controls ManualsElectronicsRF Transceiver for Remote Control of Spa Control System
1234
Page 96
J-400 Series
18.12 J1000™ Wireless Remote Battery Replacement
1. Turn the remote unit over and locate the battery
door (Figure A).
2. Remove the four screws securing the door.
3. Remove the battery door. You could use a small screwdriver to pry
the door upward.
4. Replace or install 3 AAA batteries.
5. Reinstall the battery door and screws.
Note: Remote unit is water resistant not waterproof, therefore the unit
should be stored in a dry location within your home and never be left in
the spa while the cover is on and spa is not in use.
Figure A
Figure B
Figure C