user manual

Reference Manual
300530EN, Rev BA
September 2012
Rosemount 2410
2-12
Section 2. Overview
2.4 INSTALLATION
PROCEDURE
Follow these steps for a proper installation:
Review Mounting Considerations.
See “Installation Considerations”
on page 3-2.
Mount the 2410.
See “Mechanical
Installation” on page 3-3.
Wire the 2410.
See “Electrical Installation” on
page 3-5.
Make sure covers
and cable/conduit
connections are tight
Power up the 2410
Configure the 2410 (Section 4: Configuration):
- tank database
- tags
- integral display
- Primary/Secondary Bus
- Relay output
- Hybrid density
Verify operation
Enable the Write Protection
switch if required