user manual

Reference Manual

300530EN, Rev BA

September 2012

3-13

Rosemount 2410

Section 3. Installation

Figure 3-5. Segment coupler

In case there are different device types connected to the segment coupler, set

the current limitation switch (3) to the closest value above the largest current

consumption of the connected devices. See “Power Budget” on page 3-7 for

information on current consumption for various Raptor devices.

Examples

Rosemount 5900S; set the switch to 60mA.

Rosemount 5300 and 5400; set the switch to 30 mA.

Rosemount 2230; set the switch to 35 mA.

1. Switch for capacitive or direct

connection between shield and housing

potential

2. Switch for activating terminating

resistor

3. Current limitation for all ports via a

rotary switch; 30, 35, 45, or 60 mA

4. Connection of housing potential

5. LED power on indication

6. LED short-circuit indication

Trunk IN Trunk OUT

Spur

Case ground