- Emerson Electric Co. Whiteboard Accessories User Manual

2-6 INSTALLATION AND SETUP
MON2000
Transferring a MON2000 PLUS License JULY 2010
7. Open the Disk1 folder on your CD.
8. Copy all files from the Disk1 folder to the
“MON2000 Install Disk 1” floppy.
9. Remove the “MON2000 Install Disk 1” from
your floppy drive.
10.Repeat Steps 5 through 8 to copy the Disk2
and Disk3 folders to your “MON2000 Install
Disk 2” and “MON2000 Install Disk 3”
floppy disks.
11.Remove the MON2000 CD from your
CD-ROM drive.
2.5 TRANSFERRING A MON2000 PLUS LICENSE
To physically transfer the license file from one
computer to the other you will need a
removeable storage medium such as a 3.5-inch
floppy disk or a USB flash drive. Also, there
must be a licensed version on MON2000 PLUS
installed on the source computer and an
unlicensed version of MON2000 PLUS on the
targeted computer.
1. On the target computer, if using a floppy
disk, insert it into the disk drive; if using a
flash drive, insert it in to a USB slot.