- Emerson Electric Co. Wok User Manual

MON20/20 Software for Gas Chromatographs User Manual
SEPTEMBER 2010 3-9000-745
3-35
3.6.1 Renaming an analog input
Give each analog input a descriptive label to avoid confusing one unit for
another. To assign an identifying label, do the following:
1. Select Analog Inputs... from the Hardware menu. The Analog
Inputs window displays.
Figure 3-24. The Analog Inputs window
2. Double-click on the appropriate row under the Label column for the
analog input that you want to rename.
Note
The analog input devices are labelled Analog Input 1 and Analog Input N by default,
where N equals the total number of analog inputs available to the GC.
3. Type in a new descriptive name for the analog input.
4. Click OK.