- Emerson Electric Co. Wok User Manual
User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 SEPTEMBER 2010
5-24
Each report begins with the following header information:
• Date-Time: The GC’s date and time when the report was generated.
• Analysis Time: The duration, in seconds, of the analysis. Can be
configured at Application → Timed Events.... See “Setting the
cycle and analysis time” on page 4-29 for more information.
• Cycle Time: The duration, in seconds, between two consecutive
analyses. Can be configured at Application → Timed Events....
See “Setting the cycle and analysis time” on page 4-29 for more
information.
• Stream: The stream that was analyzed. Selected as part of the report
generation process. See “Viewing a saved report” on page 5-35 for
more information.
• Mode: Displays the operational status of the detector.
• Cycle Start Time: The date and time that the cycle started.
• Analyzer: Name of the GC that generated the data used for the
report.
• Stream Sequence: The identification and order of the streams that
were analyzed. Can be configured at Applications → Stream
Sequence.... See “Creating a stream sequence for a detector” on
page 4-78 for more information.