- Emerson Electric Co. Wok User Manual

User Manual MON20/20 Software for Gas Chromatographs
3-9000-745 OCTOBER 2010
1-40
3. Click OK. The Physical Name column now will be visible on all
windows that have the column, such as the Heater window shown in
the example below.
Figure 1-26. The Heater window showing Physical Name column
1.11 Selecting the GC’s networking protocol
MON 20/20 can connect to the GC using one of two networking protocols:
PPP or SLIP. If the version level of the GC’s firmware is 1.2 or lower,
MON 20/20 should be configured to use the SLIP protocol; otherwise, the
PPP protocol should be used.
To select the GC’s networking protocol, do the following:
1. Select Program Settings... from the File menu. The Program
Settings window displays.