CONTENTS CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 3-5 POWER SOURCE 5 ASSEMBLY 6 LOCATION OF CONTROLS 7 REMOTE CONTROL 8 CABLE(CATV) / SATELLITE CONNECTIONS 9 EXTERNAL AUDIO/VIDEO CONNECTIONS 10 ANTENNA CONNECTIONS 11 VCR CONNECTIONS 12 SETTING THE TV MENUS(NTSC) 13-22 SETTING THE TV MENUS(ATSC) 23-27 BASIC OPERATION 27-30 TROUBLESHOOTING GUIDE 31 RECEPTION DISTURBANCES 32 LIMITED WARRANTY 33 SPECIFICATIONS 34 1
Thank you for purchasing the "Barbie Bloom tube TM 13" Color Television with Digital Tuner and Remote Control" from Emerson Radio Corp. Please read this manual before operating this unit to become familiar with its features and obtain the performance that will bring you continued enjoyment for many years. In the event you require technical assistance, please call the Emerson service Department at: 800-898-9020.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Notes: Periodically inspect for damage, if damaged properly repair the TV player before use. Adult supervision recommended.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 9. VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) 22.DAMAGE REQUIRING SERVICE Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions.
ASSEMBLY The television looks like the drawing on the left when first unwrapped out of the giftbox. VOLUME VIDEO IN AUDIO IN CHANNEL SOURCE MENU Here are two accessories: a large flower and 3 small flowers. The small cluster of three flowers has two long rods for fixing into the grooves on top of the television set. The large flower has three long rods for fixing into the grooves of the top of the television set.
LOCATION OF CONTROLS FRONT 1. SPEAKER 2. VIDEO IN Jack-Use this jack to receive a video signal from another A/V component(AV2). 3. AUDIO IN Jack-Use this jack to receive an audio signal from another A/V component(AV2). 4. EARPHONE Jack-Connect an optional Earphone/Headphone (not included) to this jack for private listening. VOLUME CHANNEL POWER VIDEO IN SOURCE AUDIO IN 5.
REMOTE CONTROL 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 2 3 4 5 V CHIP 8 9 CCD MENU 10 CH 6 VOL SOURCE MUTE 11 7 POWER Button Buttons (For Channels 0-9) DISP. (display ) Button V-CHIP Button MENU Button Volume Up ( ) and Down ( ) Button SOURCE Button SLEEP Button CCD Button Channel Up ( ) and Down ( ) Button MUTE Button BATTERY INSTALLATION (batteries are not supplied) 3 2 Loosen the screw to open the battery compartment cover.
CABLE (CATV)/SATELLITE CONNECTIONS This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
EXTERNAL AUDIO/VIDEO CONNECTIONS When you watch a program recorded on another source(VCR. video camera, DVD, etc.), you can use the Audio/Video input jacks on the front of the TV (AV2). Connect the Audio/Video output jacks of the external unit to the Audio Input jack and the video Input jack of the TV. To access the unit connected to these jacks, press the SOURCE button so AV appears on the screen. To resume normal TV viewing, simply press the SOURCE button again.
ANTENNA CONNECTIONS CONNECTING THE ROD ANTENNA (NOT SUPPLIED). Insert the Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as shown below. ROD ANTENNA AND ADAPTOR ARE NOT SUPPLIED. OUTDOOR ANTENNA CONNECTIONS OUT DOOR VHF/UHF ANTENNA CONNECTION(ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. If using cable or Satellite, see page 9.
VCR CONNECTIONS Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable (CABLES NOT INCLUDED). VCR INCOMING CATV CABLE From VCR OUT jack 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to the ANT jack on the rear of the TV. 3. Press the SOURCE button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to watch a tape.
SETTING THE TV MENUS (NTSC) TURN ON THE TV 1 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP CCD 2 MENU CH VOL SOURCE 1. Press the POWER button 1 MUTE to turn your TV On or Standby.
SETTING THE TV MENUS (CONTINUED) SETTING THE PICTURE MENU 1 PICTURE Custom 50 65 50 50 00 1 Settings Brightness Contrast Color Sharpness Tint 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 2 CCD MENU CH VOL Select Adjust SOURCE MUTE 1. Press the Channel Up or Channel Down 2 button to select the item of Settings , Brightness , Contrast , Color , Sharpness or Tint . Setting the picture settings 2 1 2 3 4 5 6 7 8 9 DISP.
SETTING THE TV MENUS (CONTINUED) Setting the Contrast 4 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 2 3 CCD 3 Custom 50 65 50 50 00 1 PICTURE Settings Brightness Contrast Color Sharpness Tint MENU 1 CH VOL Select Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 or Volume Down 2 button to adjust the setting. (0-100) 2. Press the MENU button 3 to enter and return PICTURE setting. Setting the Color 5 1 2 3 4 5 6 7 8 9 DISP.
SETTING THE TV MENUS (CONTINUED) Setting the Tint 7 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 2 3 CCD 3 Custom 50 65 50 50 00 1 PICTURE Settings Brightness Contrast Color Sharpness Tint MENU 1 CH VOL Select Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 or Volume Down 2 button to adjust the setting. (-50~+50) 2. Press the MENU button 3 to enter and return PICTURE setting.
SETTING THE TV MENUS (CONTINUED) Setting the Add/Delete PRESET 02 Add CATV 1 Channel Add / Delete Reception Auto Search Fine AFC 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP 3 3 CCD V CHIP On 2 3 MENU 1 CH VOL Select Adjust SOURCE MUTE 2 1. Press the Volume Up 1 or Volume Down 2 button to cyclically select Del. or Add . 2. Press the MENU button 3 to enter and return PRESET setting.
SETTING THE TV MENUS (CONTINUED) Setting the Fine 6 PRESET 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP On 2 3 CCD 3 02 Add CATV 1 Channel Add / Delete Reception Auto Search Fine AFC MENU 1 CH VOL Adjust Select SOURCE MUTE 2 1. Press the Volume Up 1 or Volume Down 2 button to adjust the setting. (-50 ~ +50) 2. Press the MENU button 3 to enter and return PRESET setting. Setting the AFC 7 PRESET 1 2 3 4 5 6 7 8 9 DISP.
SETTING THE TV MENUS (CONTINUED) Setting the Clock 2 --/---/---/---/---/--- 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP 3 CLOCK Clock On time Off time Alarm Preset Channel CCD V CHIP 2 3 MENU 1 CH VOL Select Adjust 2 SOURCE 1. Press the Volume Up 1 button to set the minutes and the Volume Down hours. 2. Press the MENU button 3 to enter and return CLOCK setting. MUTE button to set the 2 Setting the On time 3 CLOCK 1:00AM --/---/---/---/--- 1 1 2 3 4 5 6 7 8 9 DISP.
SETTING THE TV MENUS (CONTINUED) Setting the Attention 5 1:00AM --/---/---/---/--- 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 2 3 CCD 3 CLOCK Clock On time Off time Alarm Preset Channel MENU 1 CH VOL Select Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 button to set the minutes and the Volume 2 Down button to set the hours. 2. Press the MENU button 3 to enter and return CLOCK setting. Note: This function is a time alarm clock.
SETTING THE TV MENUS (CONTINUED) SETTING THE FUNCTION MENU 1 FUNCTION English Off Off 1 Language C.Caption Parental Ctrl 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP CCD 1 2 1 MENU CH VOL Select Adjust SOURCE 1. Press the Channel Up 1 or Channel Down Parental Ctrl the item. 2 MUTE 2 button to select Language, C.Caption or Setting the Language 2 1 English Off Off 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 2 3 1 3 FUNCTION Language C.
SETTING THE TV MENUS (CONTINUED) SETTING THE Parental Ctrl 4 FUNCTION 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 4 5 CCD 3 1 2 MENU CH 4 VOL Select 6 3 English Off Off 1 Language C.Caption Parental Ctrl Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 or Volume Down 2 button to select Off or On. 2. Press the remote control Direct Channel Selection 6 button (0-9), enter the four digit password.
SETTING THE TV MENUS (ATSC) TURN ON THE TV 1 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP CCD 2 MENU CH VOL SOURCE 1. Press the POWER button 1 MUTE to turn your TV On or Standby. SETTING THE TV MENU 2 PICTURE AUDIO Settings Brightness Contrast Color Sharpness Standard 50 65 50 50 Select Adjust Audio Select Pix Shape Reception Auto Search Adjust Select Select PIX 1 Air Adjust FUNCTION CLOCK Clock On time Off time Alarm Preset D.
SETTING THE TV MENUS (CONTINUED) Setting the Audio 1 AUDIO MAIN 1 Audio 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP 3 CCD 3 V CHIP 2 MENU 1 CH VOL Select Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 or Volume Down 2 button to select MAIN, SUB1, SUB2 or SUB3. 2. Press the MENU button 3 to enter and return AUDIO setting. Select button does not work, only can select Adjust for Note: In Audio menu the selection. Remark: Multi-language of Audio SUB menu provide by TV broadcast.
SETTING THE TV MENUS (CONTINUED) Setting the Auto Search 3 3 PRESET Reception Auto Search Air 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 3 2 1 CCD MENU CH VOL Select Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 or Volume Down 2 button to start auto search, all the TV programs received will be stored automatically. 2. Press the POWER button 3 to stop auto search and the unit is on standby mode.
SETTING THE TV MENUS (CONTINUED) SETTING THE CLOCK MENU Setting the D.Channel (In ATSC signal) 1 CLOCK Clock On time Off time Alarm Preset D.Channel 1:00AM --/---/---/---/--- 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 2 3 CCD 1 3 MENU CH VOL Select Adjust 2 SOURCE MUTE 1. Press the Volume Up 1 or Volume Down 2 button to select a channel. 2. Press the MENU button 3 to enter and return CLOCK setting. SETTING THE FUNCTION MENU 1 FUNCTION English Off Off Off Normal 1 Language C.
Setting the VC.Type 3 FUNCTION Language C.Caption D.Caption Parental Ctrl VC. Type English Off Off Off Normal 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 3 2 CCD 3 1 MENU CH VOL Select Adjust SOURCE 2 MUTE 1. Press the Volume Up 1 or Volume Down 2 button to select Normal or Vguide. 2. Press the MENU button 3 to enter and return FUNCTION setting. Normal: function setting the same as set in "Parental Ctrl"; it mean the VC.Type setting by manually.
BASIC OPERATION SOURCE BUTTON DIRECT CHANNEL SELECTION /NUMBER(0-9)BUTTONS 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP 1 1 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP CCD MENU CH V CHIP VOL 1 SOURCE CCD MUTE MENU CH VOL 1. Press the SOURCE AV1 , AV2 or ATSC . 1 button to select TV , SOURCE MUTE 1. Use these buttons 1 to select a channel. The channel number will appear at the top right corner of the screen. DISP.(display) BUTTON SLEEP BUTTON 1 1 2 3 4 5 6 7 8 9 DISP.
BASIC OPERATION (CONTINUED) V-CHIP BUTTON US TV PROGRAMS Rating Chart Chart 1 V-Chip Control Feature is ... This unit has a built-in V-Chip Control which allows you to block unwanted TV viewing usage based on US MOVIES, US TV PROGRAMS Ratings. 1 4 5 7 8 9 DISP. 0 SLEEP V CHIP 4 6 TV-Y7 FOR AGE 7 AND OLDER: May contain mild physical or comedic violence which may frighten children under 7.
BASIC OPERATION (CONTINUED) CCD BUTTON WHAT IS CLOSED CAPTIONING? 1 2 3 4 5 6 7 8 9 DISP. 0 SLEEP V CHIP CCD This television has the capability to decode and display closed captioned television programs. Closed Captioning will display text on the screen for hearingimpaired viewers or it will translate and display text in another language. 1 CLOSED CAPTIONING WITH A VCR Close Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact.
TROUBLESHOOTING GUIDE Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION The AC power cord is not connected. Connect the AC power cord to the AC outlet. POWER No power. TV BROADCAST RECEPTION TV station experiencing problems Try another channel. Picture control is not adjusted. Check picture control adjustments. Poor or no picture. Check for source of reception disturbance. Possible local interference.
RECEPTION DISTURBANCES Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local cable company broadcast.
BARBIE- MODEL BAR322 LIMITED WARRANTY Emerson Radio Corp. Warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For a period of one (1) year (Two years on picture tube) from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at and authorized depot Repair Facility, or replace the product in our discretion.
SPECIFICATIONS GENERAL: Power Source Power Consumption Speaker Output Power Unit Dimensions AC ~ 120V 60Hz 75W 2 Watts x 1 15.55”(W) x 16.26”(H) x 14.68”(D) (395mm x 413mm x 373mm) App.21.3lbs (9.
R PART NO.