TM SmartSet® Dual Alarm Clock Radio with CD Player (U.S. Patent No. 6,567,344) OWNER'S MANUAL CKD9917BK CKD9917 Visit our web site at www.emersonradio.
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENTFIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
13.) Do not overload wall outlet. Use only power source as indicated. 14.) Use replacement parts as specified by the manufacturer. 15.) The product may be mounted to a wall only if recommended by the manufacturer. 16.) Upon completion of any service or repairs to this product, ask the service technician to perform Safety 17.) This is CLASS II apparatus with double insulation, and no protective earth provided. Before We Begin Thank you for purchasing this Emerson audio product.
IMPORTANT NOTES CLASS 1 LASER PRODUCT This product contains a low power Laser Device. • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other stereo certain that the power cord is properly equipment that radiates too much heat, installed.
MPORTANT NOTES PREPARATION FOR USE Unpacking And Set Up Remove the unit from the carton, and remove all packing materials from the unit. Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment. Remove any descriptive labels or stickers from the top or front of the unit. Do not remove any labels from the back or bottom of the cabinet.
5
Battery Back Up System This unit uses a single CR2032 battery (included) to maintain the time and alarm settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Alkaline battery for longest life and best performance. Installing and replacing the backup battery 1.) Use screw driver to remove the screw that secures the battery compartment at the bottom of the unit,and remove the battery compartment. 2.
LOCATION OF CONTROLS AND INDICATORS 7
LOCATION OF CONTROLS AND INDICATORS 1.) 2.) 3.) 4.) 5.) 6.) 7.) 8.) 9.) 10.) 11.) 12.) 13.) 14.) 15.) 16.) 17.) 18.) 19.) 20.) 21.) 22.) 23.) 24.) 25.) 26.) 27.) 28.) 29.) 30.) 31.) 32.) 33.) 34.) 35.) 36.) 37.) 38.) 39.) 40.
OPERATION INSTRUCTIONS Using The First Time IMPORTANT: The first time you connect your new SmartSet® clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, Which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone, there’s nothing else to do. Your clock is set correctly and running.
Year Display Adjustment To view the correct year, press the MONTH / DATE and TIME ZONE buttons together. The display changes from Time to Year. When you release the MONTH / DATE and TIME ZONE buttons the display returns to the correct Time. Setting The Year: Hold the MONTH / DATE and TIME ZONE buttons or together. At the same time press the buttons to set the correct year. Day of Week Display Setting The display will show the Day of Week at the b o t t o m o f t h e LED Display.
Listening To the Radio 1.) Press the ALARM OFF/POWER button on the top panel to turn the unit ‘On’. The POWER LED indicator will light. 2.) Press the RADIO/BAND button to select the FM BAND Radio function. Either the MHz or KHz indicator will light to show which band is selected. Press the RADIO/BAND button again to repeatedly switch between the AM and FM bands. 3.) Rotate the TUNING control on the right side AM BAND panel to tune to the desired station. 4.
Playing Compact Discs NOTE: This CD player can read CD-R/RW discs, in addition to normal CDs, however; the compatibility of CD-R/RW discs may be affected by the type of software that was used to cr eate the discs, as well as the quality and condition of the blank media you are using. 100% compatibility cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Press the ALARM OFF/POWER button to switch the unit ‘On’. The POWER indicator will light. 2.
7.) To Pause briefly during playback press the button. The “ PLAY ” indicator flashes and after a few seconds the display returns to correct time. The sound stops, but the disc continues to spin. Press button again to cancel pause and resume playback. or 8.) To skip forward or backward to other tracks repeatedly press the buttons until the desired track number appears in the display. Playback will begin on the selected track. 9.) To stop playback at any time press the button.
Repeat Playback You can program the player to repeat a single track or the entire disk continuously. One Track Repeat or 1. During CD disc playback, press the buttons to select the track to be repeated. 2. Press the ALARM MODE button until the REP (repeat) indicator blinks. The unit will begin playing the desired track. 3. To cancel the setting, press the ALARM MODE button until REP indicator is off. CD PLAY REP MON All Tracks Repeat 1.
Programmed Playback The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired. NOTE: Programming can only be done while the player is in the Stop mode. If a disc is playing press the button to stop playback before performing the programming steps below.
Alarm Operation Setting the ALARM Time (Wake Up time) AM This clock radio has two separate wake-up alarms that can be set and used independently. To set or adjust the wake-up times please proceed as follows: Check the Alarm Time : During CD playing or radio listening, press ALARM 1/ ALARM2 buttons to show alarm time in display.
Setting Alarm Mode Press the POWER button to off mode, hold the ALARM1/ALARM2 button and press the ALARM MODE button to set the alarm mode Weekdays only : Alarm will activate on weekdays only Weekend only : Alarm will activate on weekend only Everyday : Alarm will activate on all 7 days of a week. Turn Off Alarm If the alarm is activated, press POWER button to shut off the alarm, and the unit will be back in the off mode.
Auxiliary Input Jack (Connection Cable Not Included) This unit includes an AUX input jack to allow you to connect external devices, such as an iPod® or portable MP3 player, and listen to the music stored on your external device through the speakers of this radio. Connect the headphone jack of your external device to the AUX input jack located on the front panel of this unit.
Headphone (PHONES) Jack This unit includes a 3.5mm PHONES (headphone) jack on the front panel. This allows you to connect a set of stereo headphones (not included) for private listening without disturbing others. When headphones are connected, the built-in speakers are automatically disconnected. CD AUX PLAY REP RAN PROG SLP AM ST KHz MHz AL1 AL2 MON TUE WED THU FRI SAT SUN IMPORTANT! When using stereo headphones always set the volume control to a low level before you put on the headphones.
CARE AND MAINTEANCE Compact Disc Care • To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc.
TROUBLE SHOOTING GUIDE Symptom Radio Noise or sound distorted on AM or FM broadcasts. AM or FM, no sound. Compact Disc Player CD Player will not play. Possible Cause Solution Station not tuned properly for AM or FM. AM: The bar antenna is not positioned correctly. Volume at minimum. Retune the AM or FM broadcast station. Reposition the unit until best reception is obtained. Increase Volume. CD is not installed or Insert CD with label side installed incorrectly. up. CD skips while playing.
The Serial Number can be found on the bottom of the unit. We Suggest that you record the Serial Number of your unit in the space below for future reference.
TM CKD9917-906-01 Made In China
