Owner's manual

Recalling Preset Stations

1.) Turn the system ‘On’, press the TUNER/BAND button to select the Tuner

function and the desired band.

2.) Press the MEMO. + (PRESET) button repeatedly until the desired preset

number and frequency appears on the display.

• You may also use the number buttons on the remote control to directly select

the desired preset memory number.

• Simply press the corresponding number key on the remote handset to select

preset memory numbers 1 through 9.

• To select preset memory numbers 10 through 16, first press the “+10” button

and then the desired second digit.

For example, to select preset memory number 10, press the “+10” button and

then the “0” button.

To select preset 16, press the “+10” button and then the “6” button.

Changing Preset Stations

1.) Tune to the new station you want to memorize and press the MEMO.

(MEMORY) button to start the MEMORY indicator flashing.

2.) Repeatedly press the MEMO. + (PRESET) button until the display shows the

number of the preset memory you wish to change.

3.) Press the MEMO. (MEMORY) button again. The new station is entered in the

memory and the previous station is deleted.

ES1065_021705.p65 17/2/2005, 15:4123