Owner's manual

• For tracks 1 through 9 simply press the corresponding number button.

• For tracks 10 and higher first press the “+10” button and then the

corresponding button for the second digit.

• For track 12, press “+10” and then press “2”.

• For track 23 press “+10” twice, then press “3”.

6.) Press the button to begin programmed

playback. The MEMORY indicator stops

flashing and remains ‘On’.

The player will play all the tracks that you

programmed in the desired order.

• After the last programmed track has played

the player stops, but the MEMORY indicator

remains ‘On’ and the programmed sequence

remains in the memory.

• To play the programmed sequence again, press the button.

• To cancel the programmed sequence from the memory press the STOP

button while the player is stopped. The MEMORY indicator disappears.

• The Program sequence can also be cleared from the memory by opening the

CD door, switching to Tuner or Aux function, or pressing the STANDBY

button to return the system to the Standby (Off) mode.

Programmed Repeat Playback

You can use the Programmed and Repeat Playback functions together to

continuously repeat a programmed sequence.

First program up to 40 tracks as described on page 29, then press the REPEAT

button three times to select REPEAT ALL DISC playback.

Press the button to begin Programmed Repeat

Playback. The programmed sequence will be

repeated continuously.

ES1065_021705.p65 17/2/2005, 15:4130