Owner's manual

32
To Set The ‘OFF’ Time
7.) Press the MODE button until the “TIMER
OFF” indicator is flashing in the display.
8.) Press the MEMO. (MEMORY) button. The
Hour digits begin flashing.
9.) Press the or button to set the display
to the desired turn ‘Off’ hour, AM or PM.
10.)Press the MEMO. (MEMORY) button. The
Minute digits begin flashing.
11.) Press the or button to set the display
to the desired turn ‘Off’ minute.
12.)Press MEMO. (MEMORY) button once again
to confirm. After few seconds, the display
returns to correct time.
The TIMER indicator appears in display meaning that the Timer function is
activated.
At the selected “TIMER ON” time the system will turn on automatically to the last
function selected, either Tuner or CD.
It will play until it reaches the selected ‘Off’ time and then shut off automatically.
Note:
If the system turns on to CD function it will only play until the end of the disc and
then stop.
If you programmed the system to turn on and play for 3 hours before shutting off,
but your CD is only 45 minutes, the system will only play for 45 minutes but the
power will remain On for another 2 hours and 15 minutes before shutting Off
automatically.
To Deactivate or Activate Timer (On Front Panel Only)
Press the TIMER button on front panel to activate or deactivate the Timer function.
ES1065_021705.p65 17/2/2005, 15:4132